Simple Safe and Sturdy

The cradle has been constructed out of special quality steel to give baby a soothing happy rocking motion when lying and playing, plus a place where baby can be fed or rest close to supervision without being held.

Just Look At These Features

It has a sturdy pure cotton crochet cover that stands up to hard use and can be washed and replaced on the frame for quick drying. To remove or replace cover, simply compress the frame inwards from the sides. When replacing be sure that the hem is secure over the washer on each side of the frame. We have many popular colours.

Your Baby Will Love Being In This Baby Bounce / Bouncinette

The harness, which is made of strong cotton webbing, is interlocked and sewn into the cover, has no buckles or other device that can accidentally come undone.The horizontal strap can be adjusted to the size of the baby by taking a tuck with a safety pin on either side. Easing the baby into the harness is simple if you apply pressure on the base frame while sliding baby gently into place.

The Babybounce / Bouncinette Is Arguable The Safest Model On The Market

The vertical height of the frame from the floor to top of the cradle should be no more than 350mm and pressure may be applied to the frame to adjust the height downwards should it be necessary. The frame has been built in two sections and can be dismantled if desired for storage or travel purposes. When reassembling ensure the top of the frame slides fully into the bottom frame.

Replacement covers sold separately. Click here to see the different colour covers

Features:

• Made from 100% cotton crochet
• Harness made from strong cotton webbing
• Low center of gravity of the bouncinette makes it extremely stable
• Made in New Zealand

Delivery:

We can deliver to any mainland New Zealand physical address. (Sorry this excludes Chatham Islands, Stewart Island and Waiheke Island - please contact our Customer Services Department for freight options)

$7.00 Freight Charge for any orders under $100 when delivered within New Zealand
Free Freight for any orders over $100 when delivered within New Zealand
$5 surcharge for rural deliveries

Oversized items freight costs will be:
$30 North Island, $70 South Island per oversized item - if a rural delivery please contact customerservices@babyfactory.co.nz for a freight cost.

Gift Vouchers: Freight is FREE for all Physical Gift Vouchers purchased to go to a New Zealand address.

Overseas Orders: We also ship overseas. All our overseas orders go by New Zealand Post (with a tracking service). Overseas freight charges will be confirmed when you check out.

If you have any questions regarding shipping please contact us at customerservices@babyfactory.co.nz

*Please note the free freight offer only applies to orders made online at www.babyfactory.co.nz and delivered within New Zealand. Exclusions for oversized items may apply.

Please allow:

2 - 3 working days for Auckland deliveries
3 - 4 working days for North Island deliveries
5 - 6 working days for South Island deliveries
Rural Deliveries: 2-3 extra days for rural deliveries. Please mention your RD number when placing your order.

Around public holiday periods - please allow a few extra working days. During the Christmas period - please expect courier delivery to take a little longer than usual.

Please Note: Breast Pumps are unable to be returned (exchanged or refunded) due to Health Reasons.

• 100% Cotton
• Air Circulation
• No Buckles
• No Tipping

1 x Bouncinette

IMPORTANT MESSAGE

Baby should not be left unattended particularly where there is any possibility that a fall may occur. It is strongly recommended that the product is used only on the floor. It is possible and likely that baby in its enjoyment of the cradle will be able to move about smooth surfaces, so make sure that baby is always well supervised and away from danger areas. Baby will usually be almost sitting before outgrowing the Babybounce / Bouncinette.

Instructions

Babybounce/ Bouncinette is designed to cradle your baby with soothing rocking motion. Its pure cotton crochet cover stands up to hard use and can be washed and replaced back on frame for quick drying.

The vertical height of the frame from floor to top of the bouncer should be no more than 35cm (14 inches). Pressure may be applied to the frame to adjust the height downwards should it be necessary.

Easing baby into the bouncer is simple when you place your foot securely on the base frame while sliding baby in gently.

To remove cover, simply compress the frame inwards at the base of the hoop and slide the cover up. When replacing cover compress frame in again and slide the cover on, making sure that the hem strap of the cover is locked in place with the washers on each side.

Baby should not be left unattended as it is likely that baby in its enjoyment in the bouncer will be able to move about smooth surfaces.

DO NOT USE ON TABLES OR ANY WHERE A FALL COULD OCCUR.

IMPORTANT: Babybounce is not suitable if baby is attempting to roll or site